Thursday, April 13, 2023

Difference Between Turbo and Super charger

   TURBO CHARGER VS SUPER CHARGER 
1]Turbo Charger
Turbochargers use the vehicle's exhaust gas; two fans – a turbine fan and a compressor fan – rotate from exhaust gas.

2]Super Charger
superchargers are powered directly by the engine; a belt pulley drives gears that cause a compressor fan to rotate.

*Advantages and Disadvantage of Turbo Charger*
1] Advantages
1)Significant increase in horsepower.
2)Power vs size: allows for smaller engine displacements to produce much more power relative to their size.
3)Better fuel economy: smaller engines use less fuel to idle, and have less rotational and reciprocating mass, which improves fuel economy.
4)Higher efficiency: turbochargers run off energy that is typically lost in naturally-aspirated and supercharged engines (exhaust gases), thus the recovery of this energy improves the overall efficiency of the engine.

2]Disadvantage
1)Turbo lag: turbochargers, especially large turbochargers, take time to spool up and provide useful boost.
2) Boost threshold: for traditional turbochargers, they are often sized for a certain RPM range where the exhaust gas flow is adequate to provide additional boost for the engine. They typically do not operate across as wide an RPM range as superchargers.
3) Power surge: in some turbocharger applications, especially with larger turbos, reaching the boost threshold can provide an almost instantaneous surge in power, which could compromise tyre traction or cause some instability of the car.
4) Oil requirement: turbochargers get very hot and often tap into the engine’s oil supply. This calls for additional plumbing, and is more demanding on the engine oil. Superchargers typically do not require engine oil lubrication.


*Advantages and Disadvantage of super charger*
1] Advantages
1)  They are simpler and more reliable because they don’t have the complexities of turbine blades.
2) Superchargers also generate less heat than turbochargers, which can be important in a high-performance engine.
3) Superchargers provide a significant boost in horsepower and torque, which can be especially advantageous for smaller or lower-powered engines.
4) Supercharger are relatively easy to install and don’t require any major modifications to the engine. 

2] Disadvantage
1)  The main disadvantage of supercharger is that they take up space in the engine bay. This can be a problem in ultra-compact cars or motorcycles. Turbochargers are smaller and can be mounted further away from the heat-generating exhaust manifold.
2) They require more maintenance than turbochargers. 
3)  Higher parasitic power loss, meaning the engine has to work harder to turn the supercharger than it does to turn the impeller on a turbocharger.
4) It required an efficient cooling system.
5) They use engine power to operate 

IMPORTANT IMAGES
Evolution of Super charger (1860-2021)
Dugald Clerk invented super charger 
            Variety of super charger
                    Super charger engine 

Evolution of Turbo charger (1962-2022) 
First  turbo was invented in 1905 by Dr. Alfred Büchi
           Variety of turbo charger 
   Turbo chargerd Buggati Chiron W16


By- Tanishq Deshmukh

Uploaded blog 
1)How does Engine works ?
2)How does turbo charger works?
3)How does Super Charger works?
4)Types of turbo charger (Part-1)
5) Type of turbo charger ( Part -2) 
6) Types of super charger
7) Differences between Turbo and Super charger .

So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 

13 April 2023

Wednesday, April 12, 2023

Types of Supercharge

               Types of supercharge
  • Roots Superchargers.
  • Twin-Screw Superchargers.
  • Centrifugal Supercharger.
  • Electric Superchargers. 
1]Roots Supercharge
The roots supercharger traps air in a chamber between the rotor and the housing, in the void between the rotor's lobes, and transports this trapped air to the outlet side, at the engine's intake manifold. By virtue of moving air into the manifold at a rate higher than the engine consumes it, pressure is built..

*Advantage*
1)The Roots-type supercharger adds a lot of power to the vehicle.
2) The power delivery is instantaneous, the throttle response is smooth, and the torque curve is equally improved across all RPM.

*Disadvantage*
1) In the range of partial load, the conveying speed is higher, i.E. Wear on the conveyor pipe and breakage of the conveying material will be greater.
2) A conveying speed once chosen can only be altered with considerable expenditure.

2]Twin-Screw Superchargers.
In a twin-screw style supercharger, the two rotors are designed to mesh with one another and compress the air forced between them. So while they're both similar in design, twin-screw superchargers compress the air directly while roots superchargers create pressure in the manifold that compresses the air.

*Advantages*
1) More horsepower and boost can be            achieved as compared to root type             supercharger.
2) During the each rotation, a specific             fixed amount of air is trapped and moved to discharge side where it is compressed
3) Less noisy.

*Disadvantage*
1) Installation is complex
2) Continuously compression and                    discharge irrespective of boost                    requirement at low or high speed.
3) It also exhibits heating issues but less        as compared with the root type.

3]Centrifugal Supercharger. 
A centrifugal supercharger is a specialized type of supercharger that makes use of centrifugal force in order to increase the manifold air pressure, MAP. An increased MAP allows the engine to burn more fuel, which results in an increased power output. Centrifugal superchargers are generally attached to the front of the engine via a belt-drive or gear-drive from the engine's crankshaft.

*Advantage*
1) Boost level is high compared to other superchargers . 
2) Parasitic load: power required to turn centrifugal supercharger is very less
3) Less heat generation.

*Disadvantage*
1) More Engine oil required.
2) Not great for low rpm boost.
3) Its performance is directly related to          engine speed. 

4]Electric Superchargers. 
An electric supercharger is a specific type of supercharger for internal combustion engines that uses an electrically powered forced-air system that contains an electric motor to pressurize the intake air. By pressurizing the air available to the engine intake system, the air becomes more dense, and is matched with more fuel, producing the increased horsepower to the wheels.

*Advantage*
1) compress air and increase the amount        of air delivered to an engine. 
2) electric motor can not only be used to         drive the turbocharger shaft, but it can         also be used to brake it. 

*Disadvantage*
1) electric turbocharging will remain comparatively expensive for some time. 


IMPORTANT IMAGES 
               Electric Superchargers
          Twin-Screw Superchargers.

*comment*

1] 1) which engine it is?
2) which type of supercharge used ? 

2]1) Which company engine it is? 
   2) which supercharge is used? 
3] Which supercharge is used ? 

Comment the answer 

By- Tanishq Deshmukh

Uploaded blog 
1)How does Engine works ?
2)How does turbo charger works?
3)How does Super Charger works?
4)Types of turbo charger (Part-1)
5) Type of turbo charger ( Part -2) 
6) Types of super charger

Upcoming blog 
1) Differences between Turbo and Super charger .

So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 

12 April 2023

Tuesday, April 11, 2023

Types of Turbo (Part-2)

         TYPES OF TURBO (PART-2)

1) Types of turbo
(1) Single turbo 
(2) TwinTurbo
(3) Twin scroll turbo 
(4)Variable twin scroll turbo 
(5) Electric Turbo 
(6)Variable- geometry turbocharger 

(4)Variable twin scroll turbo 
Variable twin-scroll turbos combine the technology of VGTs and twin-scroll turbos. It uses the same principle of high and low Air ratio  .The variable twin-scroll turbo is a combination of twin-scroll turbo and variable geometry turbo. 
*Advantages*
1)This turbo allows good high-end                      performance in any vehicle .
2)These are cheaper than variable geometry turbo, so it allows gasoline turbocharging.

*Disadvantage*
1)It requires a higher cost and is complex compared to a single turbo or common twin-scroll turbo
2)This technique has been worked with before, but it is not sustainable in the production world.

(5) Electric Turbo 
The electric turbos are the latest and recently added to the turbocharger industry. It is completely different from the other types of turbochargers. They are used to reduce the turbo lag and assist a normal turbocharger at low engine speeds.
This is done by attaching an electric motor that rotates the compressor from the start and through the lower revs until the power from the exhaust volume is sufficient to make the turbocharger work.
These types of turbochargers have one drawback is that it is quite expensive and complex. This turbocharger choice also allows for the consumed energy to be recovered and used to generate power.

*Advantages*
1)Turbo lag and exhaust gases are easily eliminated by connecting an electric motor directly to the compressor wheel.
2)The wasted energy is recovered by connecting an electric motor to an exhaust turbine.

*Disadvantage*
1)Higher costs are required and are complicated, as you must now consider the electric motor  and ensure that it remains cool to prevent safety issues.(heat)
2) VGTs or twin scrolls can provide similar benefits at a significantly lower cost.

(6) Variable-geometry turbocharger (VGT)
Vgt can adjust the size of exhaust gases inlet and outlet to improve its efficiency and performance capabilities.The vgt design is a work of art consisting of a veins that can be adjusted to control the flow of the exhaust gases to the turbine the vgt veins are controlled by an actuator that adjusts the angle of veins based on the engine needs this allows the turbocharger to provide boost at lower engine speed.

*Advantages*
1) Reducing turbo lag and allowing for better control of exhaust and gas back pressure.
2)Engine speed providing the driver with smoother and more responsive Driving experience.

*Disadvantage*
1) Complicated and high cost mechanical system.
2) A VGT turbo fails when soot, carbon, rust, and corrosion build up in the turbine housing, causing the exhaust gases to seize up. Although repairing actuator valves can be costly in terms of both time and money, there are ways to troubleshoot valve issues without seeing a mechanic.

*Uses*
In trucks, VGTs are also used to control the ratio of exhaust recirculated back to the engine inlet .

Important Images
                      Mini electric turbo 
           Audi electric turbo engine
 
By- Tanishq Deshmukh

Uploaded blog 
1)How does Engine works ?
2)How does turbo charger works?
3)How does Super Charger works?
4)Types of turbo charger (Part-1)

Upcoming blog 
1) Differences between Turbo and Super charger .
2) Types of Supercharger.

So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 

11April 2023

Monday, April 10, 2023

Types of Turbo

                 Types of  Turbo (PART-1)
1) Types of turbo
(1) Single turbo 
(2) TwinTurbo
(3) Twin scroll turbo 
(4)Variable twin scroll turbo 
(5)Twin scroll 
(6)Variable- geometry turbocharger 

1] Single Turbo  {working}
A single turbocharger is mounted to the exhaust manifold and uses exhaust gases to spin the turbine. This turbine is connected to a compressor, which compresses air and sends it into the engine. 

*Advantages*
1) It is less expensive than twin-turbo system
2)The weight of your engine is reduced.(It gives small engines more power)
3)It add 70 to 150 HP to engine .

*Disadvantage*
1)The single turbo has a somewhat narrow effective RPM range.
2)It produce a lot of heat { This can melt the components of engine and may
 turbocharger fail}

*Uses*
They are used in muscular car ,sports car ,racing car, Racing bike , sports bike etc.

2] TwinTurbo {working}
A twin-turbocharger works by using two turbochargers of the different size (for eg-66mm compressor and 68mm turbine wheels )to force air into the engine's cylinders to add extra horsepower. 

*Advantages*
1) increase air and fuel intake nearly twice as much as the same engine would without a turbocharger.
2)lt has the potential for reductions in turbo lag compared to one single turbocharger doing all the work.

*Disadvantage*
1)They are inherently more complicated and more expensive.
2)Due to the increased number of parts and potential failure points - particularly when the systems are older.

*Uses*
They are used in BMW, LANCIA, and SAAB cars.
 
3] Twin scroll turbo {working}
 A twin-scroll turbocharger gathers exhaust from pairs of cylinders in alternating sequence. The exhaust strikes the turbine blades, spinning them at up to 150,000 rpm. The alternating pulses of exhaust help eliminate turbo lag.

*Advantages*
1)Twin-scroll turbochargers  increase low-end torque, improve boost response, raise power throughout the powerband, maximize turbine efficiency, reduce engine pumping losses, improve fuel economy, decrease intake charge dilution during valve overlap and lower exhaust gas temperatures.

*Disadvantage*
1)poor efficiency at high engine load and speed. 
2)complex and expensive exhaust manifold and turbine casing.

*Uses*
In the BMW X5 M and X6 M, twin-scroll turbos are used, one on each side of the V8. For parallel twin turbos on 'V' shaped engines, the benefits (and drawbacks) are very similar to single turbo setups.

Important Images                Twin scroll turbocharger 
             Twin Turbocharger engine 
                Mustang GT single turbo 
                          Turbo image 

By- Tanishq Deshmukh

Uploaded blog 
1)How does Engine works ?
2)How does turbo charger works?
3)How does Super Charger works?

Upcoming blog 
1) Differences between Turbo and Super charger .
2) Types of Supercharger.


So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 

10 April 2023

Sunday, April 9, 2023

How does Super charger works

         How does Super Charger Work
1) what are super charger?
A supercharger is an air compressor that increases the pressure of air supplied to an internal combustion engine. This aids in higher power output as the engine gets more oxygen in each of its intake cycles and helps it to burn more fuel.

2) How Super Charger Works?
A supercharger works by increasing an engine's power and torque. Supercharger are powered by mechanical energy for example by connection to an engine's
Crankshaft .
(1) Air filter.

(2)Air intake pipe.

(3) Intake manifold.
The Supercharger sits atop the intake manifold. The intake manifold channels air from the Supercharger unit to individual cylinder.

(4) Supercharger housing

(5)Gear drive system
Opposing gears translate power to the rotors.

(6)Rotors and lobes 
Spinning rotors pump air through the Supercharger.The long fins or ridges that span the length of the rotors shaft are called lobes.

(7) Discharge port 
Air exists the Supercharger through a specially shaped discharge port at the bottom of the housing.

(8) Pulley
Pulley diametre and construction is an easily accessible way to alter Supercharger performance characteristics.

(9) Drive Belt
The drive belt supplies power to the Supercharger from the crankshaft.

3) Types of Supercharger.
1)Screw - Type Supercharger
2) Centrifugal Supercharger
3) Roots-Type Supercharger
4) Electric Supercharger


3)who invented first Supercharged car 
Gottlieb Daimler received a German patent for supercharging an internal combustion engine in 1885.

4)Usage in cars  
The world's first series-produced cars with superchargers were the 1.6 litre Mercedes 6/25 hp and 2.6 litre Mercedes 10/40 hp, both of which began production in 1923.
They were marketed as Kompressor models, a term which was used for various models until 2012.

*Advantages*
1)Higher power output.
2)Greater induction of charge mass.
3)Better atomization of fuel.
4)Better mixing of fuel and air.
5)Better scavenging products.
6)Better torque characteristics over whole range.
7)Quick acceleration of vehicle.
8) Complete and smooth combustion.

*Disadvantage*
1)Increased detonation tendency in SI             engines.
2)Increased thermal stress.
3)Increased heat loss due to increased             turbulence.
4)Increased gas loading.
5)Increased cooling requirements of the         engine.
6)Uses engine power .
7) Less efficiency.
8) Potential high heat.

5) Important Images 
                   Rotors and lobes 
                    
       This is World's fastest Bike engine.      
                      Kawasaki ninja H2r
Max speed- 400 km/h 
Fuel economy: 12 to 15 km/l
Displacement: 998 cc
Braking horsepower-305.75
Torque -165 Nm
Engine- 998cc BS6
               Supercharged engine 


By- Tanishq Deshmukh.

Uploaded blog 
1) How does Turbo charger works 
Upcoming blog 
1) Differences between Turbo and Super charger .
2) Types of Supercharger.
3) Types of Turbo.

So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 
9 April 2023


Saturday, April 8, 2023

How does Turbo charger works ?

HOW DOES TURBO CHARGER WORKS ?
1) What is Turbo charger?
1)A system in a car or bike that sends a mixture of petrol and air into the engine at high pressure, making it more powerful.
                              Or
2)In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to produce more power for a given displacement.
2) How Does it works? (In my words )
To increase the power of Engine. The movement of piston per minute should increase.The exhaust gas pressure is so Powerful that it can rotate a turbine 80,000  to 200,000 rpm (Rotation per Minute).A rod is connected between turbine and compressor .How it work, When 4 stroke complete and exhaust gas goes out it is direct connected to turbo charger the exhaust gas move the the exhaust turbine and due to its motion the rod connected to compressor wheel moves and it absorb the air send it  to combustion chamber. 

*Advantages*
1)This allows smaller engines to put out more horsepower and torque than they ordinarily would.
2)Improved fuel  economy.
3)Higher efficiency , doesn't consume engine power. 
4)Significant  horsepower (HP) gains.

*Disadvantage*
1) Difficult to install .
2) Cooling issues due to high heat.
3) Lack of power in lower RPM range.
4)Turbo lag .

3)First turbo car ?
In 1962 Oldsmobile Jetfire V8 was the first turbo car in the World.

4) Types of turbo
1) Single turbo 
2) TwinTurbo
3) Twin scroll turbo 
4)Variable twin scroll turbo 
5)Twin scroll 
6)Variable- geometry turbocharger 

5) Important Images .

        Toyota Supra Twin turbo  V12 

           Diagram of Turbo and engine 

                    Twins Turbo engine 

By- Tanishq Deshmukh.

Upcoming blog 
1) How Does Super charger works .
2) Differences between Turbo and Super charger .
3) Types of Supercharger.
4) Types of Turbo.

So Be ready to increase your Knowledge.
                    Have a nice Day 
                       Thank you 
8 April 2023

Friday, April 7, 2023

How Does engine works ?

                              Engine 

1) What is engine? 
An engine or motor  is a machine designed to convert one or more forms of energy into mechanical energy. Available energy sources include potential energy, heat energy, chemical energy, electric potential and nuclear energy. 

2) Fuels 
Petrol , Diesel , kerosene, CNG, Hydrogen Gas, Electricity ,Alcohol etc. are the Fuels required to run the engine. 
 • Petrol and Diesel Engine are commonly       use in car,ship,Train, generates etc.
 • In petrol and Diesel engine there are two      types called 2 Stroke and 4 stroke                engine.

(1)what is 2 stroke engine ?
A two-stroke engine is a type of internal combustion engine that completes a power cycle with two strokes of the piston during one power cycle, this power cycle being completed in one revolution of the crankshaft.
 • where it is use ?
   Dirt bikes.
   Mopeds.
   Jet skis.
   Small outboard motors.
   Radio-controlled model planes.
 *Advantages*
 • For the same dimensions power                   developed is twice to that of four stroke     engines.
• Power required foe exhaust and suction      stroke is saved.
• More uniform turning moment compared    to four stroke engines hence a lighter          flywheel is required.
• Lighter Weight 

 *Disadvantage
• Two-stroke engines don't last nearly as       long as four-stroke engines ...
•  Two-stroke oil is expensive, and you           need about 4 ounces of it per gallon of       gas 
• Two-stroke engines do not use fuel           efficiently, so you would get fewer miles     per gallon.

(2)What is 4 stroke engine?
A four-stroke engine is an internal combustion engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either direction. The four separate strokes are termed: 
1st Stroke = Intake 
Fuel + Air mixtures is drawn in .

2nd  Stroke= Compression 
Air + fuel mixtures is compressed.

3rd stroke= Power 
Explosion forces piston down .

4th stroke= Exhaust 
Piston pushes  out  burned gases .

*Advantages*
• Four stroke engine makes less pollution      as compared to two stroke engine .
• High engine efficiency.
• Low Fuel Consumption
• Oil is not needed in mixtures as Two             strokes engine .

*Disadvantage*
• Low power output 
• Heavy Vibration
• Complex structure 
• It creates higher torque at a lower rpm.

Important Images 
                TWO STROKE ENGINE 

                FOUR STROKE ENGINE 


More blog  about engine are coming soon 

By- Tanishq Deshmukh 

7 April 2023

Mission: Chandrayaan 3

In this blog you will get information about Chandrayaan 3 rocket, it's purpose ,which rocket is used, which engine are power...